Godox Witstro FT16 Wireless Remote AD 360, AD 180

Description:

The wireless power control flash trigger FT-16 is designed for versatile use. When used on Godox flashes (with wireless control port), it is not only a flash trigger, but also incorporates multiple functions, such as, adjusting power ratio, controlling the on-or-off of the buzzer and the modeling lamp or the AF-assist beam. The trigger set consists of a transmitter (on camera) and a receiver (on-flash).

Features:

• Power, wireless control flash 16 packets 
• Remote control lamp and focus lamp, and a buzzer switch           
• Wireless synchronous flash           
• Large area of liquid crystal display, clear and easy to understand           
• Receiver mini light, flash power supply, without battery           
• 50 meters above the maximum sync speed regulation range, 1/250 seconds           
• Supports two types of power display mode (5.0~10.0 or 1/1~1/128)           
• Easy to install and use the camera control in hot shoe on demand

Wireless adjusting flash settings:

The trigger set can wireless adjust the following settings: the flash power ratio, the on-or-off of the buzzer and the modeling lamp or the AF-assist beam, as well as the power-ratio display mode.

• On the transmitter and the receiver, set the channel select switch to the same position and the Power Control Group Select Dial to the same grade.
• Insert the receiver into the Wireless Control Port of the flash unit. Then power the flash on.           
• Adjust the flash settings on your transmitter.

Wireless Triggering the Flash       

• On the transmitter and the receiver, set the Channel Select Switch to the same position 
• Insert the receiver into the Wireless Control Port of the flash unit. Then power the flash on.           
• Press the Test Button to fire a flash. Alternatively, you can set the transmitter onto the cameras hot shoe and press the cameras shutter-release button to fire a flash.

Technical Specification: